North Carolina: Another delay on voting machines, and a move toward hand-marked ballots | Travis Fain/WRAL

North Carolina moved toward a new requirement for hand-marked ballots Monday night when a divided, but bipartisan, State Board of Elections voted to rework the rules that govern what voting machines are allowed here. The board will have to gather again in about two weeks to make the change official, and Monday’s decision delayed for the third time in two months a long-awaited decision to certify new voting equipment. But activists hailed the vote as a move toward more secure elections. The time to approve new machines ahead of the 2020 elections grows short. State law requires small test runs in actual elections before new machines can be fully deployed, meaning equipment would need to be in place for the November municipal elections to be ready for the March 2020 presidential primaries. The state legislature may change that law, allowing for simulated election tests instead. It may also delay the coming decertification of touchscreen voting systems that roughly a third of North Carolina counties use now.

North Carolina: Board of Elections delays election machine vote | Will Doran/Raleigh News & Observer

North Carolina election officials cited lingering concerns over election hacking in explaining why they again delayed certifying new voting machines for the 2020 elections Monday. “Trust and confidence in the security of any voting system that we put in place in North Carolina is absolutely vital,” said Stella Anderson, the board member who proposed the delay Monday night. The five-member board has a majority of Democrats, but the vote was bipartisan — and not without controversy. Anderson and fellow Democrat Jeff Carmon voted with Republican member David Black to delay the decision. The board’s chairman, Democrat Bob Cordle, opposed the delay, as did Republican member Ken Raymond. Cordle and Raymond say the delay has them concerned about a time crunch. With Monday’s vote, a decision wouldn’t be made until at least mid-August, in order to provide the public ample notice of a new meeting. The voting machines used in about a third of North Carolina’s counties will be certified at the end of this year. Cordle and Raymond said any further delays will harm the counties that need to figure out which new machines they want to use in 2020.

North Carolina: Board of Elections to decide on new voting machines | Rad Berky/WCNC

In an unusual weekend session, the North Carolina State Board of Elections will meet Sunday to certify the companies who want to sell new voting machines for use in elections next year. This follows the decision to return the state from electronic voting to equipment that uses paper ballots. Mecklenburg County’s Elections Director Michael Dickerson said the county is one of a few that already keeps a paper record, but whichever new system is chosen will go a step farther. “We have a paper record of what you voted but they want to give each voter a paper ballot before you finalize your vote,” said Dickerson. South Carolina this week took the wraps off the new equipment voters there will be using. After finalizing choices on a touchscreen, the machines will print a paper ballot with a barcode. Voters will then check their paper ballot and place it in a scanner. The scanner takes an image of the ballot, counts it and keeps the original in a locked ballot box.

North Carolina: Elections board may pick new voting machine options Sunday | Travis Fain/WRAL

The State Board of Elections will meet Sunday evening for a certification vote on what new voting machines will be allowed in North Carolina. The long-delayed decision will follow a demonstration of the various options from companies hoping to do business, or more business, in the state. Local boards of election decide what systems to buy, but the state board has to decide first whether various options meet state requirements. “If they meet the statutory requirements, they’re to be certified,” Board Chairman Robert Cordle said Tuesday. The board plans to meet at 5 p.m. in the Triangle Ballroom at the Cary Embassy Suites on Harrison Oaks Boulevard in Cary, not in the usual meeting room at the board offices.

National: Multiple Bills Seek To Secure Elections: Will They Do It? | Taylor Armerding/Forbes

If the security of voting systems in the next election will be a function of the amount of legislation on the topic now pending in Congress, we’ve got nothing to worry about in November 2020. There is a growing pile of bills in both the House and Senate, most featuring several to dozens of cosponsors—sometimes even from both parties—accompanied by press releases with made-to-order endorsements from congressional leaders, advocacy groups and cybersecurity experts. They all call for securing U.S. elections and “protecting our democracy.” But, of course, the number of bills doesn’t matter. It’s about quality, not quantity. The things that do matter are what gets enacted into law and whether its mandates get done or get watered down. And that, as the predictable cliché goes, remains to be seen.

National: Who’s behind voting-machine makers? Money of unclear origins | Emery P. Dalesio/Associated Press

The voting-machine makers that aim to sell their systems in North Carolina are largely owned by private equity firms that don’t disclose their investors. The companies didn’t want the public to know even that much. North Carolina’s statewide elections board demanded the machine-makers’ ownership information last month after special counsel Robert Mueller’s April report into Russian efforts to sway the 2016 presidential election. Their concerns about potential foreign interference have grown since Maryland officials learned last year that a company maintaining that state’s election infrastructure did not disclose its financing by a venture fund whose largest investor is a Russian oligarch. The private-equity backers of the three voting systems vendors seeking approval to sell to county elections boards in North Carolina told The Associated Press they’re controlled by U.S. citizens. They claimed they have no ties to foreign oligarchs or other nefarious persons facing financial sanctions by Washington. But they didn’t provide information about the sources of the money they invest. And they asked the board not to share what they did disclose with the public. The elections board released the companies’ responses — as required by law — under a public records request from The AP. Election security watchdogs remain frustrated.

National: Thousands of election systems running software that will soon be outdated: report | Tal Axelrod/The Hill

The vast majority of the nation’s 10,000 election jurisdictions are using an operating system that will soon be outdated, according to an Associated Press analysis. Those jurisdictions using Windows 7 or an older operating system to create ballots, program voting machines, tally votes and report counts will reach its “end of life” on Jan. 14 — meaning Microsoft will no longer provide technical support or produce “patches” to deal with vulnerabilities that hackers could possibly exploit. Microsoft told the AP in a statement Friday that it would offer continued Windows 7 security updates for a fee through 2023. The company did not immediately respond to a request for comment from The Hill. Critics told the AP that the obsolescence was an example of what happens when private companies determine the security level of election systems without federal guidelines. Vendors defended themselves, saying they’ve been making consistent improvements on security, but state officials said they were wary of federal involvement in state and local races.

National: Voting Machine Makers Claim The Names Of The Entities That Own Them Are Trade Secrets | Tim Cushing/Techdirt

Recently, the North Carolina State Board of Elections asked suppliers of electronic voting machines a simple question: who owns you? (h/t Annemarie Bridy) On June 14, 2019, the State Board of Elections requested that your companies disclose any owners or shareholders with a 5% or greater interest or share in each of the vendor’s company, any subsidiary company, of the vendor, and the vendor’s parent company. This seems like very basic information — information the Board should know and should be able to pass on to the general public. After all, these are the makers of devices used by the public while electing their representatives. They should know who’s running these companies and who their majority stakeholders are. If something goes wrong (and something always does), they should know who’s ultimately responsible for the latest debacle. It’s not like the state was asking the manufacturers to cough up code and machine schematics. All it wanted to know is the people behind the company nameplates. But the responses the board received indicate voting system manufacturers believe releasing any info about their companies’ compositions will somehow compromise their market advantage. Hart Intercivic said letting the public know that the company is owned by H.I.G. Hart, LLC and Gregg L. Burt is a fact that would devalue the company if it were made public. Hart InterCivic, a corporation that derives independent actual value from this information not being generally known or readily ascertainable and makes reasonable efforts to maintain the secrecy of this information, requests that it be designated as a trade secret pursuant to G.S. § 132-1.2(1)d. and G.S. § 66-152(3).

North Carolina: Is North Carolina rushing into major election changes? Some officials warn of confusion in 2020 | Will Doran/Charlotte Observer

Roughly a third of North Carolina voters use electronic machines with no paper ballots. But that might all change next year for the 2020 presidential election. Supporters of the change say it will help ensure election security, especially given reports from the FBI and other sources that the Russian government attempted to influence America’s 2016 elections and may have hacked into some U.S. voting software. But the switch has been held up for years, despite first being ordered in a 2013 law. Now, some officials — including the new state elections director — worry that there’s not enough time left to get new voting systems in place for the 2020 elections. The state’s biggest county, Mecklenburg, is one of the counties that will have to make the switch away from touchscreen voting machines. But officials there still don’t know what machines they might be allowed to buy as replacements, or how much they’ll cost. Meanwhile, the deadline to get new machines in place is coming up at the end of this year.

National: Microsoft offers software tools to secure elections | Associated Press

Microsoft has announced an ambitious effort to make voting secure, verifiable and subject to reliable audits by registering ballots in encrypted form so they can be accurately and independently tracked long after they are cast. Two of the three top U.S elections vendors have expressed interest in potentially incorporating the open-source software into their voting systems. The software is being developed with Galois, an Oregon-based company separately creating a secure voting system prototype under contract with the Pentagon’s advanced research agency, DARPA. Dubbed “ElectionGuard,” it will be available this summer, Microsoft says, with early prototypes ready to pilot for next year’s U.S. general elections. CEO Satya Nadella announced the initiative Monday at a developer’s conference in Seattle, saying the software development kit would help “modernize all of the election infrastructure everywhere in the world.” Three little-known U.S. companies control about 90 percent of the market for election equipment, but have long faced criticism for poor security, antiquated technology and insufficient transparency around their proprietary, black-box voting systems. Open-source software is inherently more secure because the underlying code is easily scrutinized by outside experts but has been shunned by the dominant vendors whose customers — the nation’s 10,000 election jurisdictions — are mostly strapped for cash. None offered bids when Travis County, Texas, home to Austin, sought to build a system with the “end-to-end” verification attributes that ElectionGuard promises to deliver. Two of the leading vendors, Election Systems & Software of Omaha, Nebraska, and Hart InterCivic of Austin, Texas, both expressed interest in partnering with Microsoft for ElectionGuard. A spokeswoman for a third vendor, Dominion Voting Systems of Denver, said the company looks forward to “learning more” about the initiative.

National: Trips To Vegas And Chocolate-Covered Pretzels: Election Vendors Come Under Scrutiny | NPR

It is likely to be a banner year for the voting equipment industry with state and local election offices planning to spend hundreds of millions of dollars on new machines ahead of the 2020 election. This year’s purchases will probably amount to the biggest buying wave since right after the 2000 presidential election, when officials rushed to replace discredited punch card machines with touchscreen voting equipment. Those machines are rapidly aging and are being replaced with machines that leave a paper backup as a result of security concerns about purely electronic voting. The voting equipment purchases come at a time of increased scrutiny over the security and integrity of elections following Russia’s efforts to interfere in the 2016 election. Some states, such as Georgia, South Carolina and Delaware, are replacing all of their voting machines, while several other states, including California, Ohio and Pennsylvania, are replacing much of their equipment. About one quarter of voters live in the states doing most of the buying. The buying spree has also put a focus on the close ties between vendors and the government officials who buy their equipment. Advocacy groups and some politicians allege that vendors have unduly influenced the procurement process in many places, something the companies and election officials deny.

National: Election tech vendors say they’re securing their systems. Does anyone believe them? | CyberScoop

The last few years have been an awakening for Election Systems & Software. Before 2016, very few people were publicly pressing the company to change the way it handled its cybersecurity practices. Now, the nation’s leading manufacturer of election technology has become a lightning rod for critics. Security experts say the small number of companies that dominate the nation’s election technology market, including ES&S, have failed to acknowledge and remedy vulnerabilities that lie in systems used to hold elections across the country. Once left to obscurity, the entire ecosystem has been called into question since the Russian government was found to have interfered with the 2016 presidential campaign. While there has never been any evidence to suggest that any voting machines were compromised, the Department of Homeland Security and FBI recently issued a memo that all 50 states were at least targeted by Russian intelligence. The peak of the criticism came after the Voting Village exhibition at the 2018 DEF CON security conference, where amateur hackers unearthed a bevy of flaws in the company’s tech. In a number of publications — including CyberScoop — ES&S disputed the notion that it didn’t take cybersecurity seriously, arguing its own due diligence was enough to satisfy any security worries. It didn’t help the Omaha, Nebraska-based company’s case when the Voting Village committee issued a report in September that found decades-old vulnerabilities in an ES&S ballot tabulator that has been used in elections in more than half of the states. In light of these issues, some of the election tech manufacturers are trying to change course, and ES&S is the most public about its efforts. With the country gearing up for the 2020 presidential election, the company has revamped its security testing procedures, putting together a plan to let penetration testers from both the public and private sector evaluate the safety of its systems. Furthermore, ES&S and its competitors are communicating in an unprecedented way about committing to a certain level of standards that can lift the entire industry to a better security baseline.

Georgia: Voting system contract attracts bids from large election companies | Atlanta Journal-Constitution

At least four election companies submitted confidential bids before Tuesday’s deadline to sell voting machines to Georgia, which plans to become the first state to roll out touchscreen-and-printer voting technology for every voter starting next year. The competition for the state’s $150 million contract will now be evaluated by government officials, and a decision on the state’s next election company is scheduled for mid-July. The selection process will fuel debates over election integrity and ongoing lawsuits following a contentious decision by the Georgia General Assembly to switch from electronic voting machines to a similar system that adds printed-out paper ballots. Critics say both systems are inherently insecure, and they want Georgia to use paper ballots filled out by hand. The Secretary of State’s Office wouldn’t release any information about the companies bidding on the contract, citing a state law that exempts proposals and cost estimates from public disclosure until the government gives notice of intent to award a contract to the successful bidder. The law says disclosure would undermine the goal of obtaining the best value during negotiations. But four large election companies confirmed to The Atlanta Journal-Constitution that they submitted bids before Tuesday’s deadline.

National: ‘They think they are above the law’: the firms that own America’s voting system | The Guardian

Maryland congressman Jamie Raskin is a newcomer to the cause of reforming America’s vote-counting machines, welcomed through baptism by fire. In 2015, Maryland’s main election system vendor was bought by a parent company with ties to a Russian oligarch. The state’s election officials did not know about the purchase until July 2018, when the FBI notified them of the potential conflict. The FBI investigated and did not find any evidence of tampering or sharing of voter data. But the incident was a giant red flag as to the potential vulnerabilities of American democracy – especially as many states have outsourced vote-counting to the private sector. After all, the purchase happened while Russian agents were mounting multiple disinformation and cybersecurity campaigns to interfere with America’s 2016 general election. “To say that they don’t have any evidence of any wrongdoing is not to say that nothing untoward happened,” Raskin said. “It’s simply to say that we don’t have the evidence of it.” The fact is that democracy in the United States is now largely a secretive and privately-run affair conducted out of the public eye with little oversight. The corporations that run every aspect of American elections, from voter registration to casting and counting votes by machine, are subject to limited state and federal regulation. The companies are privately-owned and closely held, making information about ownership and financial stability difficult to obtain. The software source code and hardware design of their systems are kept as trade secrets and therefore difficult to study or investigate.

Missouri: St. Louis County Board Of Elections Gearing Up For Upgrades | St. Louis Public Radio

The St. Louis County Board of Elections is upgrading its voting equipment for the upcoming 2020 elections. The county has roughly 1,800 touch voting machines and 500 optical scan paper ballot tabulators that have had their fair share of wear and tear, and the software is now out of date. Eric Fey, the Democratic director of elections for the St. Louis County Board, said the last time county voters had new voting equipment was in 2005. “Although the equipment is 100% accurate, we have to replace components more often,” Fey said. “It’s very hard to get replacement parts. And then with the software, the programming of the ballot, the tabulation of the ballots is very labor intensive.” Currently, the board of elections is holding public demonstrations with three contenders including Dominion, Hart InterCivic and the county’s current vendor Election Systems & Software.

National: Election machine vendors back legislation requiring post-election audits, vulnerability disclosure | InsideCyberSecurity

Two major election machine vendors stated their support for requiring post-election audits to ensure the validity of election results in the case of a cyber attack or other tampering, in response to questions recently posed by senior Senate Democrats. Sens. Amy Klobuchar (D-MN), Gary Peters (D-MI), Jack Reed (D-RI), and Mark Warner (D-VA) sent letters last month to the three largest election machine vendors asking whether the companies would support legislation around post-election audits and what cyber controls are in place to secure the vote. In its response submitted on Tuesday, Hart InterCivic wrote that “robust post-election audits are the most compelling response” to threats posed by outdated technology. “Auditing is the most transparent and effective means to demonstrate that election outcomes accurately reflect the intention of voters,” Hart wrote. “Hart unequivocally supports state efforts to strengthen auditing procedures.” Tom Burt, the president and CEO of Election Systems and Software, also supported the idea of legislation around post-election audits, writing that the company “strongly supports legislation that would expand the use of routine post-election audits. ES&S believes that successful post-election audits, including risk-limiting audits such as those which have recently occurred in several jurisdictions, will increase confidence in our country’s election process.”

Uncategorized: Top Democrats press voting vendors over election security concerns | The Hill

Democratic senators sent a letter to three of the country’s top election system vendors on Tuesday, pressing them on what they will do to help secure the 2020 election from foreign attacks. The letter, sent to the heads of voting vendors Election Systems & Software LLC, Hart InterCivic Inc. and Dominion Voting Systems, requested that the companies inform Democratic leaders of efforts to improve their systems to guard against cyber vulnerabilities. Sen. Amy Klobuchar (D-Minn.), the ranking member of the Senate Rules Committee, was joined on the letter by Senate Intelligence Committee Vice Chairman Mark Warner (D-Va.), Senate Homeland Security Committee ranking member Gary Peters (D-Mich.) and Senate Armed Services Committee ranking member Jack Reed (D-R.I.). “Despite the progress that has been made, election security experts and federal and state government officials continue to warn that more must be done to fortify our election systems,” the senators wrote. “Of particular concern is the fact that many of the machines that Americans use to vote have not been meaningfully updated in nearly two decades.”

National: Voting-machine vendors have some serious questions to answer, senators say | CyberScoop

While the security of the 2020 election remains a prominent topic in Washington, a group of Democratic senators is raising alarms about longer-term issues that will resonate after voters are done choosing a president about 20 months from now. The three companies that make most of the voting technology used in the U.S. must be more transparent about their plans to improve their products to meet current expectations about security and performance, says a letter Wednesday by Sen. Amy Klobuchar of Minnesota and three other top Democrats. In particular, the senators say every machine should reliably produce paper records, and the companies should do far more to upgrade their products. “The integrity of our elections is directly tied to the machines we vote on — the products that you make,” says the letter from Klobuchar, Mark Warner of Virginia, Jack Reed of Rhode Island and Gary Peters of Michigan. “Despite shouldering such a massive responsibility, there has been a lack of meaningful innovation in the election vendor industry and our democracy is paying the price.”

National: Senate Democrats investigate cybersecurity of election machines, introduce version of H.R. 1 | InsideCyberSecurity.com

A group of senior Senate Democrats is seeking information on what the three largest manufacturers of U.S. voting machines are doing to secure the systems ahead of the 2020 elections, while the entire Democratic Caucus on Wednesday signed on to sponsor the Senate version of House-passed H.R. 1, the “For the People Act,” which includes language on securing election machines. A letter — signed by Senate Rules ranking member Amy Klobuchar (D-MN), Intelligence ranking member Mark Warner (D-VA), Homeland Security and Governmental Affairs ranking member Gary Peters (D-MI), and Armed Services ranking member Jack Reed (D-RI) — was sent Tuesday to voting machine vendors Hart InterCivic, Dominion Voting Systems, and Election Systems and Software, or ES&S. “Despite the progress that has been made, election security experts and federal and state government officials continue to warn that more must be done to fortify our election systems,” the senators wrote. “Of particular concern is the fact that many of the machines that Americans use to vote have not been meaningfully updated in nearly two decades. Although each of your companies has a combination of older legacy machines and newer systems, vulnerabilities in each present a problem for the security of our democracy and they must be addressed.” The senators posed questions on steps the companies are taking to secure their machines ahead of 2020, and how Congress can assist in these efforts; what the plans are for updating “legacy” voting machines; whether the companies would support legislation requiring “expanded use of post-election audits”; if the companies have vulnerability disclosure programs; and if they employ full-time cybersecurity experts.

National: Wyden lambastes voting machine makers as ‘accountable to nobody’ | Politico

Sen. Ron Wyden (D-Ore.) on Thursday attacked the small but powerful group of companies that controls the production of most voting equipment used in the U.S. “The maintenance of our constitutional rights should not depend on the sketchy ethics of these well-connected corporations that stonewall the Congress, lie to public officials, and have repeatedly gouged taxpayers, in my view, selling all of this stuff,” Wyden said during the Election Verification Network conference, a gathering of voting integrity advocates and election security experts in Washington. Wyden has been a leading voice among lawmakers who have criticized the voting machine industry as too opaque and not subject to enough oversight from Washington, especially as concerns grow among U.S. intelligence officials that elections will once again be a prime hacking target in 2020. “We’re up against some really entrenched, powerful interests, who have really just figured out a way to be above the law,” he said. “There is no other way to characterize it.” Furthermore, Wyden said, voting machine vendors have “been able to hotwire the political system in certain parts of the country.” He noted that newly elected Georgia Gov. Brian Kemp picked the top lobbyist for the voting giant Election Systems & Software as his deputy chief of staff. The companies, he said, “are accountable to nobody.”

National: How Voting-Machine Lobbyists Undermine the Democratic Process | The New Yorker

In the past decade, Election Systems & Software (E.S. & S.), the largest manufacturer of voting machines in the country, has routinely wined and dined a select group of state-election brass, which the company called an “advisory board,” offering them airfare on trips to places like Las Vegas and New York, upscale-hotel accommodations, and tickets to live events. Among the recipients of this largesse, according to an investigation by McClatchy published last year, was David Dove, the chief of staff to Georgia’s then secretary of state, Brian Kemp. Kemp, the new governor of Georgia, made news in the midterm elections for his efforts to keep people of color from voting and for overseeing his own election. In March of 2017, when Dove attended an E.S. & S. junket in Las Vegas, Kemp’s office was in the market to replace the state’s entire inventory of voting machines. “It’s highly inappropriate for any election official to be accepting anything of value from a primary contractor,” Virginia Canter, the chief ethics officer at Citizens for Responsibility and Ethics in Washington, told McClatchy. “It shocks the conscience.” (Kathy Rogers, E.S. & S.’s senior vice-president for governmental affairs, told McClatchy that there was nothing untoward about the advisory board, which she said has been “immensely valuable in providing customer feedback.”)

Kentucky: Blevins seeking millions for new voting machines in Lexington | Lexington Herald Leader

Fayette County’ Clerk Don Blevins Jr. told the Lexington council Tuesday he will request up to $2 million in coming months to replace decade-old voting machines that were partly to blame for long lines at precincts in November. “Our machines stink,” said Blevins, who oversees elections in Fayette County. “It’s time. We need to replace these machines.” Lexington has about 1,000 Hart eSlate machines, which use a wheel that voters turn to highlight their choice on the ballot. Voters then push a button to make the highlighted choice. Most precincts only have a couple machines, which creates long lines when the ballot is lengthy. The machines can be attached to another machine that prints the completed paper ballot, but Lexington does not use those. That means there is no printed record of an individual’s vote.

Kentucky: ‘I can’t stand these machines.’ Record turnout wasn’t why you waited in line to vote | Lexington Herald Leader

Long lines and long waits to vote in Fayette County on Tuesday led many to expect record turnout in the midterm election. But, in the end, turnout was only at 52 percent in Lexington. Higher than usual, but not a record. So the blame turned back to Fayette County’s electronic voting machines, which take a long time to use, especially with a long and complicated ballot. That means some people who didn’t have an hour or more to wait in line may have left before voting. “I certainly heard my fair share of people saying the line was too long and they had to leave,” said Debra Hensley, a former Lexington-Fayette Urban County Council member. “A person who cannot vote is an error on our part.” It’s a complaint that County Clerk Don Blevins Jr., the county’s chief elections officer, has heard before. And he agrees. “I can’t stand these machines,” Blevins said Wednesday. “They’re awkward to use, older citizens really struggle with the wheel, the user interface is just about as bad as it could be.”

Editorials: Voting Machines: What Could Possibly Go Wrong? | Jennifer Cohn/NYR Daily | The New York Review of Books

Since the 2016 election, there has been a good deal of commentary and reporting about the threats to American democracy from, on the one hand, Russian interference by Facebook and Twitterbot-distributed propaganda, and on the other, voter ID laws and other partisan voter suppression measures such as electoral roll purges. Both of these concerns are real and urgent, but there is a third, yet more sinister threat to the integrity of the November 6 elections: the vulnerability of the voting machines themselves. This potential weakness is critical because the entire system of our democracy depends on public trust—the belief that, however divided the country is and fiercely contested elections are, the result has integrity. Nothing is more insidious and corrosive than the idea that the tally of votes itself could be unreliable and exposed to fraud. 

National: Complaints Allege Cruz, Kemp Benefitting from Faulty Voting Machines That Change Dem Ballots to GOP | Law & Crime

Early voters submitting ballots for hotly contested races in Texas and Georgia claim that their states’ paperless voting machines are changing their votes for Democratic candidates to Republican, or deleting them altogether. According to Politico, individuals, as well as civil rights groups, have filed complaints alleging that glitches are resulting in votes for Republican Sen. Ted Cruz (R-Texas) instead of his Democratic challenger Beto O’Rourke. There have also been complaints that votes have gone to Georgia’s Republican candidate for governor, Brian Kemp, instead of his Democratic opponent Stacey Abrams. Voting technology experts have said that this is not the result of foul play, but outdated, faulty systems that don’t even leave a paper trail of what happened. Kemp, who is currently the Georgia Secretary of State, has resisted past calls for the state to change voting systems. His state has used the same system since 2002. Texas only uses electronic machines in some counties, but there have been reports of ballots that were intended to be “straight ticket” votes for one party were changed to the other party.

National: Private Equity Controls the Gatekeepers of American Democracy | Bloomberg

Millions of Americans will cast votes in Tuesday’s midterm elections, some on machines that experts say use outdated software or are vulnerable to hacking. If there are glitches or some races are too close to call — or evidence emerges of more meddling attempts by Russia — voters may wake up on Wednesday and wonder: Can we trust the outcome? Meet, then, the gatekeepers of American democracy: Three obscure, private equity-backed companies control an estimated $300 million U.S. voting-machine industry. Though most of their revenue comes from taxpayers, and they play an indispensable role in determining the balance of power in America, the companies largely function in secret. Devices made by Election Systems & Software LLC, Dominion Voting Systems and Hart InterCivic Inc. will process about nine of every ten ballots next week. Each of the companies is privately held and at least partially controlled by private equity firms. Beyond that, little is known about how they operate or to whom they answer. They don’t disclose financial results and aren’t subject to federal regulation. While the companies say their technology is secure and up-to-date, security experts for years have raised concerns that older, sometimes poorly engineered, equipment can jeopardize the integrity of elections and, more importantly, erode public trust.

Texas: Straight-ticket voting problems could be due to old machines | The Texas Tribune

A national spotlight fell on Texas’ voting equipment last week after some voters complained that their votes on electronic voting machines had changed. State election officials chalked it up to user error. Critics alleged malfeasance or a software bug. The Austin-based company behind the machines says an important piece of context is missing from this debate: these machines are 16 years old. “It’s very much like someone calling Apple and asking for support on their iPhone 1,” said Steven Sockwell, vice president of marketing at Hart InterCivic. Most Texas counties last upgraded their electronic voting machines well over a decade ago, tapping billions in funds Congress approved to upgrade voting equipment around the country following election irregularities during the 2000 presidential election. Dozens of Texas counties purchased Hart’s eSlate machines. It’s those same machines that a number of voters attempted to cast straight-ticket ballots on last week only to hit a snag: when they reviewed their list of candidates on the summary screen, their choices were deselected or a candidate from an opposing party was selected.

Texas: Hart eSlate Voting Machines Have Been ‘a Known Problem’ for a Decade | Motherboard

Texas voters experiencing issues with voting machines used in that state have been told by election officials that they are the problem, not the machines. The state says voters are inadvertently touching the machines in ways they shouldn’t, causing the machines to alter or delete their vote in the hotly contested senate race between Republican incumbent Ted Cruz and Democratic challenger Beto O’Rourke. But Dan Wallach, a computer science professor at Rice University in Houston who has examined the systems extensively in the past, told Motherboard in a phone interview that the problem is a common type of software bug that the maker of the equipment could have fixed a decade ago and didn’t, despite previous voter complaints. What’s more, he says the same systems have much more serious security problems that the manufacturer has failed to fix that make them susceptible to hacking. The problem involves eSlate voting machines made by Hart InterCivic—direct-recording electronic machines that use a dial and button for voters to make their selections. Voters turn the dial in the lower right corner of the machine to scroll through each race and page of a digital ballot, and press the “enter” button, located just left of the dial, to make their selections.

National: How Electronic-Voting-Machine Errors Reflect a Wider Crisis for American Democracy | The New Yorker

When reports began circulating last week that voting machines in Texas were flipping ballots cast for Beto O’Rourke over to Ted Cruz, and machines in Georgia were changing votes for the Democratic gubernatorial candidate Stacey Abrams to those for her Republican opponent, Brian Kemp, it would not have been unreasonable to suppose that those machines had been hacked. After all, their vulnerabilities have been known for nearly two decades. In September, J. Alex Halderman, a computer-science professor at the University of Michigan, demonstrated to members of Congress precisely how easy it is to surreptitiously manipulate the AccuVote TS, a variant of the direct-recording electronic (D.R.E.) voting machines used in Georgia. In addition, Halderman noted, it is impossible to verify that the votes cast were not the votes intended, since the AccuVote does not provide a physical record of the transaction.